Push buttons – SUUNTO Cobra User Manual
Page 14
12
2.3. PUSH BUTTONS
The dive computer has easy-to-use push buttons and an advisory display, which
guides the user. The SMART (MODE) button is the key to the system. The two
scroll buttons, PLAN and TIME, are used for scrolling up and down the menus
and to show the alternative displays. The dive computer is controlled with these
three push buttons as follows (see Fig. 2.2.).
Press the SMART (MODE) button
•
To activate the dive computer.
•
To change from the Surface Mode to the menu based modes.
•
To select, confi rm or quit a submode (short press).
•
To immediately exit any submode to the Surface Mode (long press).
•
To activate the electroluminescent backlight (in the Surface Mode hold
down the mode button for more than two (2) seconds, during a dive for
one (1) second).
Press the arrow up scroll (PLAN) button
•
To activate the timekeeping display, if the display is blank.
•
To activate the Dive Planning in the Surface Mode.
•
To make a special bookmark in the profi le memory during a dive.
•
To scroll up the options (s, increase).
Press the arrow down scroll (TIME) button
•
To activate the timekeeping display, if the display is blank.
•
To activate the Time display(s) and/or alternative display(s).
•
To scroll down the options (t, decrease).
The dive computer is controlled with the SMART (MODE/On/Backlight/Select/
OK/Quit) and the PLAN s and TIME t push buttons and with the water contacts
as follows:
Activation press
the
SMART (On) button or immerse the instrument in
water
for
fi ve (5) seconds.
Dive Planning
in the Surface Mode, press the PLAN button.
Menu Modes
press the SMART (MODE) button.
The display is illuminated by holding down the SMART button for more than
two seconds.