SUUNTO Cobra User Manual
Page 3

1
DEFINITION OF WARNINGS, CAUTIONS AND NOTES
Throughout this manual, special references are made when deemed important. Three
classifi cations are used to separate these references by their order of importance.
WARNING
is used in connection with a procedure or situation that
may result in serious injury or death.
CAUTION
is used in connection with a procedure or situation that
will result in damage to the product.
NOTE
is used to emphasize important information.
COPYRIGHT, TRADEMARK AND PATENT NOTICE
This instruction manual is copyrighted and all rights are reserved. It may not, in whole
or in part, be copied, photocopied, reproduced, translated, or reduced to any media
without prior written consent from SUUNTO.
SUUNTO, COBRA, Consumed Bottom Time (CBT), Oxygen Limit Fraction (OLF),
SUUNTO Reduced Gradient Bubble Model (RGBM), Continuous Decompression
and their logos are all registered or unregistered trademarks of SUUNTO. All rights
are reserved.
Patents have been issued or applied for one or several features of this product.
CE
The CE mark is used to mark conformity with the European Union EMC
directive 89/336/EEC. The SUUNTO dive instruments fulfi ll all the required EU
directives.
FIOH, Laajaniityntie 1, FIN-01620 Vantaa, Finland, notifi ed body no.0430, has
EC type-examined this type of personal protective equipment.
EN 250 Respiratory equipment - Open circuit self-contained compressed air diving
apparatus - Requirements, testing, marking.
The tank pressure gauge and the parts of this product used in measuring the tank
pressure meet the requirements set in the section of the European Standard EN 250
that concern tank pressure measurements. The instruments must be serviced by an
authorized dealer every second year or after 200 dives (whichever comes fi rst).
PrEN 13319
PrEN 13319 “Diving accessories - Depth gauges and combined depth and time
measuring devices - Functional and safety requirements, test methods” is a
European diving depth gauge standard draft. The COBRA is designed to comply
with this draft standard.
ISO 9001
SUUNTO Oyj’s Quality Assurance System is certifi ed by Det Norske Veritas to be
according to the ISO 9001 in all SUUNTO Oyj’s operations (Quality Certifi cate No.
96-HEL-AQ-220).