SUUNTO Cobra - Manual (Page 34)

32
3.6. AT THE SURFACE
3.6.1. SURFACE INTERVAL
An ascent to any depth shallower than 1.2 m [4 ft]
will cause the DIVING display to be replaced by the
SURFACE display, giving the following information
(Fig. 3.28.):
• maximum depth of last dive in meters [ft]
• present depth in meters [ft]
• no-fl ying warning indicated by an airplane
icon
• Altitude Adjustment setting
• Personal Adjustment setting
• Diver attention symbol indicates if you should
prolong your surface interval time
• STOP label for 5 min, if the Mandatory Safety
Stop was violated
• Er, if the decompression ceiling was violated
(= Error Mode) (Fig. 3.31.)
• Cylinder pressure in bars [psi]
• dive time of last dive in minutes, shown as
DIVE TIME.
Or when the TIME button is pressed once or twice:
• the current time, shown as TIME instead of the
DIVE TIME
• the current temperature with °C for Centigrade
[or °F for Fahrenheit]
• the surface time in hours and minutes
(separated by a colon), telling the duration of
the present surface interval (Fig. 3.29.)
• the desaturation/no-fl ying time in hours and
minutes is shown next to the airplane in the
center window of the display (Fig. 3.30.).
Fig. 3.28. Surface display.
You have surfaced from a 18
minute dive, which maximum
depth was 20.0 m [66 ft]. The
present depth is 0.0 m [0 ft].
Airplane symbol indicates that
you should not fl y and diver
attention symbol indicates that
you should prolong your surface
interval time because of excess
micro-bubbles.
Fig 3.29. Surface interval, Surface
time display. Pressing TIME button
once will show surface time display.
MAX
TIME DIVE
m
NO
bar
TIME
SURF
MAX
°C TIME
m
NO