Automatic flight control system, Flying a rnav gps approach with vertical guidance – Garmin G1000 Socata TBM 850 User Manual
Page 428
![background image](/manuals/250549/428/background.png)
Garmin G1000 Pilot’s Guide for the Socata TBM 850
190-00709-00 Rev. A
7-44
AUTOMATIC FLIGHT CONTROL SYSTEM
Flying a RNAV GPS approach with vertical guidance:
1)
Arm flight director modes for a RNAV GPS approach with vertical guidance:
a)
Make sure the navigation source is set to GPS (use CDI Softkey to change navigation source).
b)
Select the Runway 35R LPV approach for KCOS. Load and activate the approach into the flight plan.
2)
Press the APR Key once clearance for approach has been received. GPS Approach Mode is activated and
Glidepath Mode is armed.
3)
Once the glidepath is captured, Glidepath Mode becomes active. The flight director now provides guidance to
the missed approach point.
4)
There are two options available at this point, as the autopilot flies the approach:
• Push the AP DISC Switch at the decision
height and land the aircraft.
• Use the GA Switch to execute a missed approach.
4
GPS APR/
G
P
M
ode
FALUR
1
2
3
GPS NA
V Mode
KCOS
HABUK
PYNON
CEGIX
Figure 7-44 LPV Approach to KCOS