Display setup, Interface setup, Gps navigation – Garmin GPS 60 User Manual

Page 51: The setup menu

GPS Navigation

Display Setup

The Display Setup Page allows you to set backlight timeout, bright-

ness level and display contrast. You can also change the brightness and

contrast levels by pressing and releasing the POWER key. For instruc-

tions on changing backlight levels, and contrast, see p. 6.

Interface Setup

The Interface Setup Page allows you to control the input/output

format used when connecting your unit to a computer, external NMEA

device, DGPS beacon receiver, or other device using a USB or Serial Port

Cable.

The following settings are available:
GARMIN—The proprietary format used to exchange waypoint, route,

track log, and MapSource data with a PC. Use this option when trans-

ferring data with MapSource software.
GARMIN DGPS—The proprietary format used with a Garmin differ-

ential beacon receiver (e.g., GBR 21). Allows you to tune the beacon

receiver directly from the GPS 60.

The Setup Menu