Garmin GPS 155XL TSO - Manual (Page 81)

ROUTE NAV
Adding Active
Route Waypoints
SECTION
4
71
The distance field can be selected to display cumulative (‘cum’) distance or the dis-
tance for each route leg (‘leg’). If cumulative is selected, the first leg’s distance will be
displayed. The second leg will represent the first leg’s distance plus the second leg, and
so on. The time field may be configured to display the estimated time enroute (ete),
estimated time of arrival (eta) or desired track (dtk) for each leg.
To change the distance and time fields:
1. With the cursor active, rotate O to highlight the field you want to change.
2. Rotate
K
to select the desired setting and press
C
.
The active route page may also be used to create a new route or edit the route you
are currently navigating (approach, SID or STAR waypoints cannot be edited), and pro-
vides a fast method of selecting any route waypoint as your next destination waypoint
without modifying the active route. If you are editing the active route and want to save
it in its original form, copy it to an open storage route before editing.
To add waypoints to the active route:
1. Press C , if necessary, to activate the cursor.
2. Use
O
to highlight the first blank waypoint field, or highlight the waypoint before which
you would like to add the new waypoint.
3. Use
K
and
O
to enter the new waypoint identifier. Press
E
.
4. Press
E
to accept or
\
to cancel. The cursor will automatically move to the next way-
point field, and the remaining route waypoints (if any are present) will move down the list
accordingly.
Active route page with cumulative distance (cum)
and desired track (dtk) displayed.
Active route page with leg distance and estimated
time enroute displayed.
155xlb manual 1/12/99 4:06 PM Page 71