Garmin GPS 155XL TSO - Manual (Page 61)

WPT KEY
Waypoint Confirmation
Duplicate Waypoints
SECTION
2
Waypoint confirmation page
Duplicate waypoints page
51
The GPS 155XL’s extensive waypoint database makes it possible for several way-
points to share the same identifier. To ensure that you are selecting the waypoint
desired, the GPS 155XL will always offer the waypoint confirmation page (which
shows the waypoint’s position) when an identifier is entered for a particular function.
To accept the waypoint position:
1. Press
E
with the cursor over the ‘ok?’ prompt.
To reject the waypoint position:
1. Press \ with the cursor over the ‘ok?’ prompt.
Once a waypoint has been accepted or rejected, the previous page will be dis-
played. If there is more than one waypoint available for a selected identifier, the GPS
155XL will display a duplicate waypoint page for you to choose the desired waypoint.
The waypoint identifier and number of duplicates will be shown at the top of the
page, with the waypoint type and region of each duplicate indicated below. The way-
points listed are sorted by the distance from your present position.
To scroll through additional duplicate waypoints:
1. Rotate
O
with the cursor active, or
K
with the cursor inactive.
To select the desired waypoint from the duplicate list:
1. Activate the cursor and rotate
O
to highlight the desired waypoint.
2. Press E . The waypoint confirmation page will appear.
3. Press
E
over the ‘ok?’ prompt to accept the waypoint or
\
to reject the waypoint
and return to the duplicate waypoints list.
155xlb manual 1/12/99 4:05 PM Page 51