Garmin GPSMAP 76 - Manual (Page 23)

GPSMAP 76 Owner’s Manual 7
b
AsIc
o
perAtIon
> c
reAtInG A
n
eW
r
oute
editing a Route
The Route page has a secondary menu containing
seven options: Use Map, Insert Waypoint, Remove
Waypoint, Reverse Route, Plan Route, Delete the
Route, and Start Navigation. To display the Route Edit
Options, select the Route page and press MENU.
Use Map—displays the Map page with the Route Line
active and the Map Pointer located on the waypoint
previously highlighted on the Route page.
Review Route Waypoint—displays the waypoint
information. To review information on a route
waypoint, place the Map Pointer on the waypoint
then press ENTER. This displays an options menu.
Highlight Review and press ENTER.
Inserting a New waypoint—There are two methods
that can be used to insert a new waypoint into a route.
1. Highlight and select Use Map. Place the Map
Pointer on the route leg that you want to insert
the new point into. When the solid line turns to
a small dashed line, press eNTeR. The Map
Pointer now displays “Ins” under it. Move the
Map Pointer, dragging the Route Line to the
new location, then press eNTeR. If the new
location is a Map Feature, the point is inserted
in the leg. If the location is not on a Map
Feature, the New Waypoint page is displayed.
Press eNTeR to save the new waypoint, then
eNTeR again to insert the new waypoint in the
route.
2. Place the Map Pointer over a location that is not
a Map Feature, then press eNTeR. The New
Waypoint page is displayed. Press eNTeR to
save the new waypoint. Place the Map Pointer
over the route leg that you want to insert the
waypoint into, then press eNTeR.