Reference – Garmin GPS II User Manual

Page 70

Text mode
Original mode

Using the Cursor to Mark and GOTO Waypoints

During panning, the crosshair represents a target position right on the moving

map, with the range and bearing to the target displayed at the top corners of the
screen. You can also use the target crosshair to mark a new waypoint position or as a
GOTO destination right from the map field.

To mark the target crosshair position as a new waypoint:

1. Press MARK (Fig. 64a).

2. Enter a name and/or route number, and press ENTER.

You can also use the target crosshair as an instant GOTO destination. Similar to

the MOB mode, this function will mark and instantly set a course for a new way-
point called ‘MAP’.

To GOTO the target crosshair:

1. Press GOTO, and press ENTER (Fig. 64b).

If you want to save the MAP waypoint, be sure to rename it because it will be

overwritten the next time a map GOTO is executed.

Fig. 64a

Fig. 64b

REFERENCE

GPS II 7/23/98 4:05 PM Page 64