Garmin GPS II - Manual (Page 45)

Scanning Waypoints
As you manually enter a waypoint’s name, the GPSII’s waypoint scanning feature
will automatically display the first numerical or alphabetical match of the character
you have entered to that point. This helps eliminate the need to always enter a way-
point’s complete name.
To scan waypoints from a waypoint field:
1. Highlight the ‘waypoint name’ field, and press ENTER.
2. Press the left side of the keypad to clear the name field.
3. Scroll through the waypoints.
4. When you find the desired waypoint, press ENTER.
The waypoint scanning feature
will offer the first waypoint
that matches the character or
characters you have entered to
that point. If you have more
than one waypoint that begins
with the same letter or num-
ber, move to the next character
position as needed.
REFERENCE
39
GPS II 7/23/98 4:04 PM Page 39