Garmin GPS II - Manual (Page 29)

Not Usable— the receiver is unusable, possibly due to incorrect initialization or
abnormal satellite conditions. Turn the unit off and back on to reset, and reini-
tialize the receiver if necessary.
Simulator— the receiver is in simulator mode (Fig. 23a).
EZinit Option Prompt
The satellite status page also provides access to the EZinit prompt whenever a
position fix has not been calculated (Fig. 23b) The unit must be in searching,
AutoLocate, acquiring, simulator, or poor coverage mode. This allows you to reini-
tialize the unit (see page 7), and is useful if you have traveled over 500 miles with
the receiver off and must initialize your new position. (The EZinit prompt will auto-
matically appear if the receiver needs to be initialized. The prompt may also appear
during normal use if the antenna is shaded or the unit is indoors.)
Fig. 23a
Fig. 23b
REFERENCE
23
GPS II 7/23/98 4:04 PM Page 23