Reference – Garmin GPS II User Manual

Page 46

Text mode
Original mode

Selecting a GOTO Destination

The GPS II provides four ways to navigate to a destination: GOTO, MOB,

TracBack, and route navigation. The most basic method of selecting a destination is
the GOTO function, which lets you choose any stored waypoint as the destination
and quickly sets a direct course from your present position.

To activate the GOTO function:

1. Press GOTO.

2. Select the waypoint you want to navigate to (Fig. 40a), and press ENTER.

Once a GOTO waypoint has been activated, the compass page or highway page

will provide steering guidance to the destination until either the GOTO is cancelled
or the unit has resumed navigating the active route (see page 53).

To cancel an active GOTO:

1. Press the GOTO key.

2. Highlight ‘CANCELGOTO?’ (Fig. 40b), and press ENTER.

Fig. 40a

Fig. 40b

REFERENCE

GPS II 7/23/98 4:04 PM Page 40