Garmin GPS 95STD - Manual (Page 84)

9-11
*Continue pressing until
“Activate” is highlighted
ENT
To activate the sample route...
Press the right arrow key until
“Activate?” is highlighted. (If
“Activate?” is not displayed on this
field, you may select it by pressing
CLR.)
Press ENT to activate the route. The
Active Route Page is displayed. This
page displays the “active from” and
“active to” waypoints on line one, as
well as distance and time information
to each waypoint on the following lines.
The time information is blank since
you are not moving yet.
In order to animate the GPS 95's displays you will need to enter a simulated
speed.
To set the simulated speed...
Press NAV and the NAV softkey, if
needed, to select the Navigation
Summary Page.
Press the left arrow key to highlight the
ground speed field.
NAV *Plus NAV softkey, if
needed