Garmin GPS 95STD - Manual (Page 76)

9-3
*Press repeatedly until
“Simulator” is displayed
*Continue pressing the
alphanumeric and arrow
keys, if needed, to enter
the waypoint identifier
CLR
ENT
JKL
4
PQR
6
showing the current operational mode.
Press the right arrow to place the cursor
on the operational mode field.
Press CLR (repeatedly) until
“Simulator?” is displayed.
Press ENT to select simulator mode.
The cursor is on the reference identifier
field. Set the initial position by entering
the identifier for St. Petersburg, Florida
(KPIE).
Press the “4” key to select the letter
“K”.
Press the “6” key followed by the left
arrow key to select the letter “P”.
Continue pressing the alphanumeric
and, if needed, arrow keys until the
waypoint identifier has been entered.
Press ENT when complete.
The Waypoint Definition Page is
ENT