Using fm traffic, Led blink codes – Garmin nuvi 900T User Manual
Page 44
nüvi 900 Series Owner’s Manual
Using FM Traffic
Using FM Traffic
The traffic receiver is included in some
nüvi packages. The FM traffic receiver is
integrated in the vehicle power cable.
Use an FM TMC (Traffic Message
Channel) traffic receiver to receive
traffic information that is broadcast over
the FM Radio Data System.
For information about FM traffic
receivers and coverage areas, see
noTe: Garmin is not responsible for
the accuracy of the traffic information.
The FM traffic receiver receives
signals from the traffic service
provider and displays that information
on your nüvi.
noTe: The FM traffic receiver and
the nüvi must be in data range of an
FM station transmitting TMC data to
receive traffic information.
To power connector
on nüvi cradle
To power outlet
in vehicle
Power
LED Status
LED
Antenna
(suction cups
not shown)
LED Blink Codes
The green Power LED lights when
connected to external power. The Status
LED indicates the signal reception:
Yellow dot-dash flashes—
determining which country you are
currently in.
Yellow solid—searching for signal.
red solid—momentary sync loss.
green solid—normal traffic data.
•
•
•
•