beautypg.com

If your vehicle gets stuck – Acura 2010 MDX User Manual

Page 577

background image

2. Remove the towing hook and

wheel nut wrench located behind
the cargo area cover on the
driver's side.

3. Screw the towing hook into the

hole, and tighten it with the wheel
nut wrench.

To avoid damage to your vehicle, use
the towing hook for straight, flat
ground towing only. Do not tow at an
angle. The tow hook should not be used
to tow the vehicle onto a flat bed. Do
not use it as a tie down.

TOWING HOOK and
WHEEL NUT WRENCH

WHEEL NUT WRENCH

TOWING HOOK

Front

If Your Vehicle Gets Stuck

570

This manual is related to the following products: