Acura 2010 MDX - Manual (Page 470)

CMBS OFF Switch
To turn the CMBS off, press the
CMBS OFF switch on the dashboard
for about 1 second. When you do
this, a beeper sounds, a CMBS
indicator on the instrument panel
comes on, and a CMBS OFF
message appears on the multi-
information display. To turn the
system back on, press the switch
again for about 1 second.
When you turn the ignition switch to
the ON (II) position, the CMBS is
turned on if it was on previously. Automatic Shut Off
Any of the conditions below can
cause the CMBS to shut off. When
the system shuts off, the CMBS
indicator in the instrument panel
comes on, and a CHECK CMBS
SYSTEM message appears on the
multi-information display for about 5
seconds.
●
An abnormal tire condition is
detected (wrong tire size, flat tire,
etc.).
● Extended off-road or mountainous
driving.
● Driving your vehicle with the
parking brake applied.
● Driving your vehicle in bad
weather (rain, fog, snow, etc.).
●
A dirty radar sensor cover on the
front grille.
CMBS OFF SWITCH
CONTINUED
Collision Mitigation Braking System
™ (CMBS™)
463
Driving