Acura 2010 MDX - Manual (Page 472)

●
When the VSA system indicator
comes on (see page 469).
●
When you turn the ignition switch
to the ON (II) position, the CMBS
indicator should come on for a few
seconds, then go off. If the
indicator comes on at any other
time and a CHECK CMBS
SYSTEM message appears on the
multi-information display, there is
a problem with the CMBS. You
can still drive your vehicle, but
CMBS will not be operating. Have
your vehicle checked by a dealer.
Limitations
The CMBS may not activate under
some conditions. Here are a few
examples:
● The distance between your vehicle
and the vehicle ahead of you is too
short.
●
A vehicle cuts in front of you at a
slow speed.
●
A vehicle cuts in front of you and
brakes suddenly.
●
When you accelerate rapidly and
approach the vehicle ahead of you
at high speed.
● Immediately after you drive off.
YOUR VEHICLE
CONTINUED
Collision Mitigation Braking System
™ (CMBS™)
465
Driving