Collision mitigation braking system ™ (cmbs™) – Acura 2010 MDX User Manual
Page 471

The CMBS will automatically recover
when these conditions are improved.
CMBS Indicator
This indicator comes on for several
seconds when you turn the ignition
switch to the ON (II) position. It also
comes on and stays on when you
turn the CMBS off by pressing the
CMBS OFF switch.
To turn the CMBS back on, make
sure the vehicle is stopped and the
ignition switch is in the ON (II)
position, then press the CMBS OFF
switch for about 1 second.
The CMBS indicator normally comes
on under these conditions:
●
When you manually turn off the
system.
●
When the system shuts off
automatically.
●
When you drive in bad weather
(rain, snow, fog, etc.).
●
If anything covers the radar sensor
cover (dirt, mud, dry leaves, wet
snow, etc.).
CMBS INDICATOR
Collision Mitigation Braking System
™ (CMBS™)
464