Acura 2010 MDX - Manual (Page 165)

Pressing the button while the
heater is running will switch the
system to the HI setting air
ventilation mode.
To ventilate the seat, press the
button. The indicator (blue) next to
the button will come on. The air
ventilation system has four settings:
HI － Three indicators on.
MID － Two indicators on.
LO － One indicator on.
OFF － All indicators off.
Pressing the button while the air
ventilation is running will switch the
system to the HI setting heater
mode.
Follow these precautions whenever
you use the seat heaters and the seat
ventilation:
• If the engine is left idling for an
extended period, do not use the
seat heaters, even on the LO
setting. It can weaken the battery,
causing hard starting.
A multi-information display message
may inform you when the battery
charge is getting low.
See page 82 for more information.
Power Windows
Turn the ignition switch to the ON
(II) position to raise or lower any
window. To open a window, push the
switch down and hold it. Release the
switch when you want the window to
stop. Pull back on the switch and
hold it to close the window.
DRIVER'S WINDOW
SWITCH MAIN SWITCH
Seat Heaters and Seat Ventilation, Power Windows
158