Miscellaneous questions – Acura 2013 RDX Navigation User Manual
Page 225
224
Troubleshooting
Miscellaneous Questions
Troubles
h
ooting
Miscellaneous Questions
Problem
Solution
My clock frequently changes forward and backward by
one hour.
The clock setting is automatically updated based on your GPS location. If you live and
work on the boundary between two time zones, you can turn off this feature.
The clock changes even when I am not driving near a
time zone boundary.
The time zone boundaries are only approximated in the navigation system. Depending
on the geography of the time zone boundary, the switch to a different zone can be
erratic.
My state does not observe daylight saving time. How
do I turn off this feature?
Press the INFO button. Select Set up > Other > Clock Adjustment, and set Auto
Daylight to OFF.
Daylight saving time has started, but the navigation
system did not change time even though Auto
Daylight is set to ON.
The automatic daylight feature does not work in regions where the daylight saving
time system has not been adopted.
The navigation system automatic daylight feature is
not switching the navigation system clock on the
correct dates.
Press the INFO button. Select Set up > Other > Clock Adjustment, and set Auto
Daylight to ON. Note that the automatic daylight feature does not work in regions
where the daylight saving time system has not been adopted.
The navigation system clock switched by one hour for
no apparent reason.
You may be driving near a time zone boundary.
My battery was disconnected or went dead, and the
navigation system is asking for a code.
Press and hold the VOL
9 (Volume/Power) button for two seconds. The system
should reactivate. If you have installed an aftermarket system, contact a dealer.
How do I change the interface language?
Press the INFO button. Select Set up > Other > Language, and set the language to
English, Français, or Español.
RDX_KA-31TX4800.book Page 224 Monday, January 30, 2012 11:32 PM
QRG
2013 RDX Navigation