Acumen AiM 108CH - Manual (Page 42)

- 42 -
Chapter 9-4. Setup a Device on a Map
To setup devices on a map, drag-and-drop a device from Device List to its associated map.
The device item shows checked if the device is setup on the map.
Chapter 9-4-1. Delete a Device on a Map
To delete the device on the map, follow the following steps:
1.
Select on the device.
2. Right click on the device.
3. Select “Device Delete” menu item.
Or, uncheck the check box of the device item.
Chapter 9-4-2. Arrange a Device
To arrange the device position on the map, click on Drag Mode tool or menu item
to enable device drag mode. Use mouse point drag the device to the
destination area.