AcuRite 01055 AcuLink Weather Station - Manual (Page 4)

WEATHER PAGE DISPLAY:
The weather page display area will show you information about the
currently selected weather type. The weather scale will show you
additional information, like trend or wind direction. You may also
access history records for the currently selected weather page.
MANUALLY BROWSE WEATHER PAGES: You may manually browse
through the available weather pages at any time by pressing the
“< ” or “> ” buttons located on the front of the display console
The weather page display has three distinct viewing modes- Manual,
Cycle or Auto-Display. To change between these modes, press the
display button “ ” located on the front of the display console.
MANUAL: (default) In manual display mode, whichever weather
page you browse to will remain on the display.
CYCLE: In cycle display mode, the display will automatically cycle
through all available weather pages. Each page will be
displayed for approximately 5 seconds. Note that you may still
manually browse through the weather pages at any time by
pressing the browse buttons, but the display will begin to cycle
again after 5 seconds of no activity.
AUTO-DISPLAY: In this mode, whichever weather pages have
adverse conditions being reported will display automatically. For
example, with auto display mode selected- if it begins to rain, the
“RAINFALL” weather page will automatically display. If multiple
weather pages report adverse conditions (example;
RAINFALL/IN-TEMP), all of the affected weather pages will
automatically display in a cycle until the conditions return to
“normal”. After conditions normalize, the weather page that was
previously selected will display again.
USE
Basic Functions Display Modes
USE
The Professional Wireless Weather Center was designed to give you
the most useful information at a glance. The following is an overview
of basic functions for everyday use.
BOOK MARK:
The bookmark feature allows you to quickly view the weather
page that is most important to you, no matter what display mode
you are in.
You may “bookmark” your favorite weather page by pressing
AND HOLDING the “ ” button. This will bookmark the
currently selected category and allow you to quickly go to that
category at any time.
To go to your book marked page, press AND RELEASE the “ ”
button at any time. Note that the weather page may change
after 5 seconds if you are in CYCLE or AUTO DISPLAY modes. If
you would like to remain on your book marked weather page,
press the “ ” button to select manual display mode ( ).
6 5
WIRELESS SIGNAL RECEPTION ICON:
The display console features a “SENSOR” signal reception icon to the
left of the clock display area. If there are a low number of “bars”
present, you may experience no temperature display ( “--” ) or
inaccuracy. Occasionally, due to intermittent physical obstructions (such
as vehicle traffic, etc.) or other environmental interference, the signal
may be lost. If the sensor batteries are low the signal will be lost as well.
After a signal loss- the display console will automatically begin to search
for the wireless multi-sensor and attempt to re-acquire the wireless signal.
In the event that the signal is lost completely and cannot be re-acquired,
the antennae icon will flash with no bars.
In the case that the sensor signal is lost completely, you may need to
relocate the display console or the wireless multi-sensor.
signal
loss
(flashing)
signal
weak
signal
OK
signal
strong