AcuRite 01525 Weather Station - Manual

Installation
PC Connect
Acu-Link PC Connect
Acu-Link PC Connect
Acu-Link PC Connect v. X on your computer
Connect the small end of the
USB cable to the display console
Connect the large end of the
USB cable to your PC
The Display Console USB functions are OFF (mode 2)
by default. Make sure your display console is powered
on and receiving weather data from the 5-in-1
sensor. Then Choose USB mode 3 for full functionality.
(PC)
Weather
Display Console
2
If you have previous versions of Acu-Link PC Connect that are running,
it is recommended that you quit the running application before installing
the new software.
1
3
5
4
PC Connect Software
Download the latest PC Connect Software.
Click on the “setupacu-link” file and follow the
instructions to install Acu-Link PC Connect software
Note that upon starting the software, it may take at least 18
seconds to receive and display the weather data from the
connected Display Console. (software will display “-- --” or
default values until live data is received.)
If you have PC Connect Version 2.0 installed, we recommend UN-INSTALLING that software first.