AcuRite 00683 Thermometer - Manual

00683A3 INST01102-06
Do not return product to retail store. For Technical Assistance and
product return information, please call Customer Care:
877-221-1252
HOURS: Monday through Friday from 8:00 a.m. to 4:45 pm CST.
Main Unit Wireless Sensor
Wireless Thermometer
Instruction Manual
Thank You! We appreciate you for purchasing this wireless thermometer.
We hope you enjoy using this versatile wireless thermometer!
Features:
• Main unit with indoor and outdoor LCD temperature display.
• Wireless Sensor – range is 100’ (33m).
• Temperature measurement ranges:
Indoor main unit: +32º F to +122º F
Outdoor wireless sensor: -4º F to +158º F
• Battery operated. (batteries not included)
1 CHECK PACKAGE CONTENTS
(1) Main unit - dimensions: 2.75" x 3.5" x 1" (7 cm x 9 cm x 2.5 cm)*
(1) Wireless Sensor – dimensions: 2.5" x 3.5" x 1" (6.4 cm x 9 cm x 2.5 cm)*
(3) 1" (2.5cm) screws with plastic anchor
(1) Instructions
*Dimensions are approximate.
NOTE: Carefully remove the units from their packaging. Discard the packaging and
save the instructions.
2 READ
Please read these instructions carefully before you set up the thermometer. In this
way you can become familiar with all of the thermometer’s features and get the most
benefit from them.
MODEL # 00683A3
PLEASE DISPOSE OF OLD
OR DEFECTIVE BATTERIES
IN AN ENVIRONMENTALLY
SAFE WAY IN ACCORDANCE
WITH LOCAL REGULATIONS
W I R E L E S S
CH
MIN/MAX
CLEAR
W I R E L E S S
6 MULTIPLE WIRELESS SENSORS
The main unit supports up to three wireless sensors. Each additional wireless sensor
must be designated a different channel number. Assigning different channel numbers
differentiate each sensors temperature and hygrometer readings for the main units’
display. The included wireless sensor is automatically channel # 1.
Additional wireless sensors are sold seperately. Call 1-800-556-2548 to order.
1) Open each sensor by separating the front and back pieces
3) Use the interior slide switch to select a channel
NOTE: use channel #2 and/or #3. Channel #1 is already taken by the included
wireless sensor.
6) Press the TX button to send a signal to the main unit.
7) Snap the front and back pieces together.
8) Mount the sensor. See section 3 for placement of the remote sensor unit.
Problem: --- is displayed as the wireless sensor temperature (OUT).
Possible solutions:
•Move sensor away from interference (electrical devices, metal surfaces, etc.).s
•Batteries may need replacing.
•Sensor could be out of range (more than 100 feet from the main unit). Place the sensor
closer to the main unit.
Problem: The temperature shown for “OUT” (wireless sensor) seems to be inaccurate
Possible solutions:
•The wireless sensor will not send an outdoor temperature reading if it is not placed
outdoors. Be sure that the wireless sensor is placed outdoors.
•Make sure that the wireless sensor is out of direct sunlight or direct weather elements,
these locations may cause inaccurate readings
•Reset both units by removing all batteries and re-installing them (see section 2).
7 TROUBLESHOOTING