AcuRite 00799 Thermometer - Manual

Unpacking Instructions
Remove the protective film that is applied to the screen prior to
using this product. Peel off to remove.
Package Contents
1. Thermometer
2. Battery (pre-installed)
3. Instruction Manual
Activate Thermometer
A. Lift rubber seal on bottom of unit to
expose ON/OFF switch.
B. Slide ON/OFF switch to the “ON”
position.
C. Push rubber seal firmly into its original
position to seal the unit.
Placement for Maximum Accuracy
AcuRite products are sensitive to surrounding environmental
conditions. Placement in a proper location is critical to the accuracy
of this product. To ensure accurate temperature measurement, place
out of direct sunlight and away from heat sources.
Window Mount
Clean the area where the suction cup will be adhered to with a
household window cleaner. Be sure window is free of oil, grease,
dust or other matter. Moisten the suction cup. To mount, push firmly
on the thermometer, pressing it against the window to form a strong
suction. For best suction, select surface that is hard, smooth and
non-porous. Do not use suction cups on wood or plaster.
Instruction Manual
Window Thermometer
model 00799
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www. AcuRite.com
IMPORTANT PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
► Register a Product
Limited One Year Warranty
At AcuRite, we proudly uphold our commitment to quality technology. Chaney Instrument Co. warrants that all
products it manufactures to be of good material and workmanship, and to be free of defects when properly installed
and operated for a period of one year from the date of purchase.
We recommend that you visit us at www.AcuRite.com for the fastest way to register your product. However, product
registration does not eliminate the need to retain your original proof of purchase in order to obtain warranty
benefits.
Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and
operated for a period of one year from the date of purchase. Remedy for breach of this warranty is limited to repair or replacement of the defective item(s). Any
product which, under normal use and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon examination by Chaney,
and at its sole option, be repaired or replaced by Chaney. Transportation costs and charges for returned goods shall be paid for by the purchaser. Chaney hereby
disclaims all responsibility for such transportation costs and charges. This warranty will not be breached, and Chaney will give no credit for products it manufactures
which have received normal wear and tear, been damaged (including by acts of nature), tampered, abused, improperly installed, damaged in shipping, or repaired
or altered by others than authorized representatives of Chaney.
The above-described warranty is expressly in lieu of all other warranties, express or implied, and all other warranties are hereby expressly disclaimed, including
without limitation the implied warranty of merchantability and the implied warranty of fitness for a particular purpose. Chaney expressly disclaims all liability for
special, consequential or incidental damages, whether arising in tort or by contract from any breach of this warranty. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Chaney further disclaims all liability from personal injury
relating to its products to the extent permitted by law. By acceptance of any of Chaney’s products, the purchaser assumes all liability for the consequences arising from
their use or misuse. No person, firm or corporation is authorized to assume for Chaney any other liability in connection with the sale of its products. Furthermore, no
person, firm or corporation is authorized to modify or waive the terms of this paragraph, and the preceding paragraph, unless done in writing and signed by a duly
authorized agent of Chaney. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
For in-warranty claims:
Chaney Instrument Co. | 965 Wells St. | Lake Geneva, WI 53147
SAVE THIS MANUAL FOR FUTURE REFERENCE.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN EN-
VIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR
LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Follow the polarity (+/-) diagram in
the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of
the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in
fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use
rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals. Battery contains
mercury. Do not put in trash. Recycle or manage as hazardous waste.
Questions?
Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com.
Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its
entirety and retain it for future reference.
Features & Benefits
1. Current Temperature
Displayed in degrees
Fahrenheit.
2. Suction Cup Mount
Easily mounted on a window.
3. ON/OFF Switch
With weather-resistent seal.
Specifications
TEMPERATURE RANGE -4°F to 158°F
POWER Button cell L1154
1
2
3
Replace Battery
A. Remove the 2 small screws near the
display on top of the unit with a
small phillips screwdriver.
B. Access the battery compartment by
gently separating the upper and
lower halves of the unit.
C. Pull the clear strip outward to
remove the old battery.
D. Replace battery with a new button
cell type L1154.
F. Firmly push together the two halves of the unit.
F. Replace the 2 screws.
Printed in China
00799 INST 083112