AcuRite 01035 Weather Station - Manual (Page 5)

Setting the Time & Date
After powering on the display console, you must set your local time
and date. It is important to do this as soon as possible, as the history
functions will utilize the clock and calendar to time stamp records
and data of interest.
The default selected weather category on the display should be “SET
CLOCK” after initial power on. If “SET CLOCK” is not currently
displayed, press the up or down buttons until “SET CLOCK?” is
displayed.
After setting the clock upon initial startup, the display should
automatically bring you to the “SET DATE?” If “SET DATE?” is not
currently displayed, press the up or down buttons until “SET DATE?”
is displayed.
1. Press the “ ” button to set the clock
2. Adjust the hour up or down,note the “AM” and “PM” indicators
3. Press the “ ” button to confirm hour selection
4. Adjust the minute up or down
5. Press the “ ” button to confirm minute selection.
The clock setting procedure is now complete.
1. Press the “ ” button to set the date
2. Adjust the month up or down
3. Press the “ ” button to confirm month selection
4. Adjust the day up or down
5. Press the “ ” button to confirm day selection.
6. Adjust the year up or down.
7. Press the “ ” button to confirm year selection.
The Date setting procedure is now complete.
SETUP
7 6