beautypg.com

Activeforever Spa2Go Portable Spa (Blue) User Manual

Back wash inside the spa

background image

BACK WASH INSIDE THE SPA


Lower the temperature to 90 degrees and let
the unit run approximately 10-15 minutes.
This gives the heating element the chance to
cool down. Now unplug the power pack

Using a garden hose, place the hose over the
lower water inlet valve as shown. Turn water
on full blast and hold there for approximately
1-2 minutes. Turn water off and remove
garden hose.

Bleed the air valve that is located on the top of the
filter bucket. Water should spew out within a few
seconds. Close valve snuggly

www.Activeforever.com