ACS AET63 BioTRUSTKey - Manual (Page 22)

7.5. Security Application Module (SAM)
Note: The commands in this section ACITIVATE_SAM, DEACTIVATE_SAM,
EXCHANGE_SAM_APDU and EXCHANGE_SAM_T1_FRAME can only be used in
SAM reader.
7.5.1. ACTIVATE_SAM
This command is used to power up and reset the specified SAM and transmit the SAM's ATR in the
response.
Command format
Instruction
Code
Data length Data
SM#
88
H
01
H
SM# Must be 0; reserve for future use
Response data format
ATR
ATR Answer-To-Reset as transmitted by the card according to ISO7816-3.
NOTE The ATR is only returned in the AET63 response if the communication protocol of the
SAM is compatible with the reader, i.e., if the SAM can be processed by the AET63.
Otherwise, the AET63 returns an error status and deactivates the SAM.
7.5.2. DEACTIVATE_SAM
This command powers off the SAM
Command format
Instruction Code Data length
89
H
00
H
Response data format
No response data
Document Title Here Document Title Here
Document Title Here AET63 Reference Manual
Version 2.2
Page 22 of 26
[email protected]
www.acs.com.hk