ACS AET63 BioTRUSTKey - Manual (Page 15)

NOTIFY Specifies whether the Card Status Message shall be transmitted to notify the host
computer of card insertion / removal
01
H
: transmit Card Status Message
02
H
: do not transmit Card Status Message
Response data format
No response data
7.1.5. SET_OPTION
This command selects the options for the reader.
Command format
Instruction
Code
Data length Data
Option
07
H
01
H
Option Bit 0 (LSB bit): Select for PPS mode
Specifies reader Ù card communication speed
0 : baud rate to/from the card is from 9600 bps to 96000 bps (default)
1 : baud rate to/from the card is at 9600 bps only
Bit 2 : Select smart card file type for storing fingerprint template
0 : transparent file type (default)
1 : record file type
Bit 4 : Select for EMV mode
Specifies whether the reader is in EMV mode
0 : reader not in EMV mode (default)
1 : reader in EMV mode
Bit 7 : Select for TFM mode
Specifies whether to access TFM in intercept or transparent mode
0 : Intercept mode (default)
1 : Transparent mode
Reserved
Response data format
No response data
Document Title Here Document Title Here
Document Title Here AET63 Reference Manual
Version 2.2
Page 15 of 26
[email protected]
www.acs.com.hk