Acroprint Time Q - Manual (Page 24)

24
7. DAY CHANGE, for calculation purposes, is the time a new day
begins. By default it is set at midnight. However, it is sometimes helpful
to move the day change time forward or backward from midnight so
time worked with be credited to the desired day’s time worked totals.
The DAY CHANGE OFFSET is the amount of time the day change
is moved forward or backwards from the midnight default.
PROGRAM FUNCTION DISPLAY SHOWS
Scroll Up/Down to DAY CHANGE offset
=00:00
a. Press ENTER ENTER TIME offset
±00:00
b. Use menu and RIGHT/LEFT ENTER TIME offset
arrow keys to set time ±01:00 (example)
c. Press ENTER ±01:00 (example)
ENTER TO CONFIRM
d. Press ENTER. day change offset
The unit beeps twice. =01:00
8. DAILY OVERTIME AFTER is the number of hours worked each
day, after which Overtime will accumulate. NOTE: Leave at 24 hours
if you pay overtime based on a 40 hour week only.
Scroll Up/Down to overtime rules
a. Press ENTER 1st daily ot after
=24:00
b. Press ENTER and ENTER ELAPSED TIME
set desired hours 08:00 (example)
c. Press ENTER 08:00 (example)
ENTER TO CONFIRM
d. Press ENTER. 1st daily ot after
The unit beeps twice. =08:00
e. Scroll Up/Down to 2nd daily ot after
=24:00
Functions