Acroprint ES900 Electronic Time Recorder - Manual (Page 45)

ES900 User’s Manual 39
Set 3rd Character Code
1. In this example, the 3rd character is "MONTH". Press CHANGE until the Character Code is
"27" (MONTH). Refer to “Character Code for Alphanumeric” on pages 64 - 68 .
2. Press SET.
Setting the 3rd Command Line
1. Press SET twice to change the comment line number to "C3".
2. The flashing digit indicates "Character Position".
3. Press SET.
4. The "Character Position" changes to the "Character Code".
Follow the same procedures as outlined above for setting further Character Codes.