Acroprint ES900 Electronic Time Recorder - Manual (Page 32)

26
Change the Date
1. In this example, press CHANGE until the date is "02". Refer to DST on page 22 .
2. Press SET.
3. The "Ending Date" of the display changes from flashing to steady and the S
mark is
displayed under "SU".
Numbering Print
In this setup, you can select digits of:
• Printed Number
• Repeat Times of Number
• Type of Number Reset
Example: Change the Number Digit to 4 digits, the Repeat Times to 2, and the Reset to 0.
1. Press SELECT until the X is beside the "NUMBER" mark.
2. The flashing digit indicates "Number Digit".
Prior to enabling Numbering Print, refer to Print Order Options on page 14 to ensure
that you have set up the print order options to allow Numbering Print (options 19
through 29 allow Numbering Print).