Acroprint ATR9800 - Manual (Page 28)

ATR9800 User Guide
26 Schedules
Punched Break/Lunch Parameters
Break/Lunch Duration: Duration time is the amount of time scheduled for the break/lunch.
Minimum: The amount of time that must elapse for this break/lunch to take affect, otherwise
this time is added back to the regular total time.
Maximum: Enter the maximum time for break/lunch, if exceeded the entire break will be
deducted from the regular hours and will not be reported as break/lunch.
Grace: Enter grace time as the amount of time that the break/lunch duration can be exceeded
and the employee not be penalized.
Paid: This setting tells the system if the duration is paid or not.
Min. Work Time: Enter the minimum amount of time that must be worked before a
break/lunch can be taken.
Maximum Allowed: Enter the maximum number of breaks/lunches allowed in a single work
period.
Break/Lunch Window Parameters
When using break/lunch windows, the system does not look at how long the employee has
worked; it says my deduct period has a start and a stop time. You may or may not pay for
punch time outside the deduct window. This can be used in any combination.
In this mode, you define a window of time. Any punches that occur in this window tell the
system the employee is punching for lunch/break. Up to three windows may be defined per
shift.