ACR&Artex ME406 HM - Manual (Page 16)

ARTEX PRODUCTS / ACR ELECTRONICS, INC
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
ME406 (453-6603), ME406HM (453-6604)
25-62-30
Page 16 of 84
Jun 25/13
TASK 25-62-30-990-804
4. Frequency Allocations
SUBTASK 25-62-30-990-001
A. Application
(1) This section addresses the 406.0-406.1 MHz transmitter window and the specific frequency
band allocations residing above 406.025 MHz, beginning with 406.028 MHz, which are
assigned or reserved within the 406.0-406.1 MHz distress frequency window.
SUBTASK 25-62-30-990-002
B. Discussion
(1) The 406 MHz transmitter frequency of the ME406 Series ELT was originally 406.028 MHz. In
order to comply with COSPAS-SARSAT frequency allocation requirements, changes to the 406
MHz frequency may occur since the original release of this product.
(2) While the original ME406 Series ELTs covered by this manual transmit on 406.028 MHz,
current ME406 Series ELTs may not. The product identification label on each ELT specifies the
transmitting frequencies of the individual ELT. The 406 MHz component may be 406.028,
406.037 MHz, etc. Allocation of frequencies, based on beacon population per specified
frequency band, is controlled by COSPAS-SARSAT.
(3) The frequency references throughout this manual for the 406 MHz component should be
considered the baseline and the specific frequency indicated on the ELT product label should
be substituted if it differs from 406.028 MHz.