Rmc 7155 – Acnodes RMC 7155 User Manual
Page 66
RMC 7155
14” short depth server
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
Appendix B Installing Windows
After all hardware components have been installed, you must first configure Intel South Bridge RAID Settings before you install
the W indows OS and other software drivers. To configure RAID settings, please refer to RAID Configuration User Guides posted
on our website a
B-1
Installing Windows to a RAID System
1. Insert Microsoft's W indows Setup CD in the CD drive and the system will start booting up from CD.
2. Press the
3. W hen the W indows setup screen appears, press "S" to specify additional device(s).
4. Insert the driver diskette "Intel AA RAID XP/2003/2008/Vista Driver for ICH10R" into the floppy drive and press the
key.
5. Choose the Intel(R) ICH10R SATA RAID Controller from the list indicated in the W indows setup screen, and press the
6. Press the
it at this time.) Once all devices are specified, press the
7. From the W indows OS setup screen, press the
then continue the installation.
8. After the W indows installation is completed, the system will automatically reboot.
B-2
Installing W indows to a Non-RAID System
1. Insert Microsoft's W indows setup CD in the CD drive and the system will start booting up from CD.
2. Continue with the OS installation. The W indows OS Setup screen will display.
3. From the W indows setup screen, press the
then continue with the installation.
4. After the W indows installation is complete, the system will automatically reboot.
5. Insert the Supermicro setup CD that came with your motherboard into the CD drive during system boot, and the main
screen will display.
66