Rmc 7155 – Acnodes RMC 7155 User Manual

Page 62

RMC 7155

14” short depth server

All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.

14628 Central Blvd,

Chino, CA91710

tel:909.597.7588, fax:909.597.1939

Supervisor Password
This item indicates if a Supervisor password has been entered for the system. "Not Installed" means a Supervisor password
has not been used.

User Password
This item indicates if a user password has been entered for the system. "Not In- stalled" means that a user password has not
been used.

Change Supervisor Password
Select this feature and press to access the submenu, and then type in a new Supervisor Password.

User Access Level (Available when Supervisor Password is set as above) Available options are Full Access: grants full User
read and write access to the

Setup Utility, View Only: allows access to the Setup Utility but the fields cannot be changed, Limited: allows only limited
fields to be changed such as Date and Time, No Access: prevents User access to the Setup Utility.

Change User Password
Select this feature and press to access the submenu , and then type in a new User Password.
Clear User Password (Available only when User Password has been set)
This item allows you to clear a user password after it has been entered.

Password Check
This item allows you to check a password after it has been entered. The options are Setup and Always.

Boot Sector Virus Protection
When Enabled, the AMI BIOS displays a warning when any program (or virus) is- sues a Disk Format command or attempts
to write to the boot sector of the hard disk drive. The options are Enabled and Disabled.