Rmc 7155 – Acnodes RMC 7155 User Manual

Page 39

RMC 7155

14” short depth server

All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.

14628 Central Blvd,

Chino, CA91710

tel:909.597.7588, fax:909.597.1939

Chapter 6

Advanced Chassis Setup

This chapter covers the steps required to install components and perform mainte- nance on the chassis. For component
installation, follow the steps in the order given to eliminate the most common problems encountered. If some steps are unnec-
essary, skip ahead to the step that follows.

Tools Required: The only tool you will need to install components and perform maintainance is a Philips screwdriver.

6-1

Static-Sensitive Devices

Electrostatic discharge (ESD) can damage electronic components. To prevent damage to any printed circuit boards
(PCBs), it is important to handle them very carefully.

The following measures are generally sufficient to protect your equipment from

ESD damage.

Precautions

o Use a grounded wrist strap designed to prevent static discharge.
o Touch a grounded metal object before removing any board from its antistatic bag.
o Handle a board by its edges only; do not touch its components, peripheral chips, memory modules or gold contacts.
o W hen handling chips or modules, avoid touching their pins.
o Put the serverboard, add-on cards and peripherals back into their antistatic bags when not in use.
o For grounding purposes, make sure your computer chassis provides excellent conductivity between the power

supply, the case, the mounting fasteners and the serverboard.

Unpacking

The serverboard is shipped in antistatic packaging to avoid static damage. W hen unpacking the board, make sure the person
handling it is static protected.