Accu-Chek Advantage - Manual (Page 13)

23 22
Step Action
11 Now press the MEM button.
The On or OFF screen will
reappear.
10 Press and release the On/Off
button until the correct day is
displayed.
12 Press the On/Off and MEM
buttons at the same time to exit
and save the time and date you
have entered.
Setting the time
and date con’t
Setting Up Y
our Meter
Coding Your Meter
Before you use your meter for the
first time and every time you open a
new box of test strips, you need to
set the meter to “match” the strips.
This is called coding or calibration.
The Accu-Chek ® Advantage ® Meter is
coded using the code key found in
the box of each new vial of test
strips.
Introduction
362-13701 AdvNonSAMa 9/13/02 8:20 AM Page 22