Accu-Chek Advantage User Manual
Page 11
19
18
Setting the Time and Date
Y
ou may exit at any time when setting up the time and
date. The settings you have already made will be saved.
The time and date should be set
prior to testing if you plan to down-
load the results into software or if
you or your healthcare professional
plan to review your memory to
check when a test was done.
Introduction
Setting the time
and date
Follow these steps to set the time and
date on your meter.
Step
Action
2
Press the On/Off
and MEM
buttons at the same time until
Set appears, then release both
buttons.
You will see a screen like the
one below. Either the word On or
the word OFF will be flashing.
Setting Up Y
our Meter
Step
Action
1
Press the On/Off
button to
turn on the meter.
362-13701 AdvNonSAMa 9/13/02 8:20 AM Page 18