M-AUDIO EQMan - Manual (Page 18)

18
down during sequences sending MIDI EQ commands, either choose a
slower update speed or close the Remote Control application
altogether.
Volume Fader App
You may choose to display the Volume Fader application (EQ-Vol) or
not. If “Show” is selected, EQ-Vol is opened automatically when you
open the Remote Control and closed when the Remote Control is
closed.
The Current Program Status
In the middle of the control/status bar, the current program status is
displayed. When you load or select a program from within the Remote
Control application, its name is displayed here, as well as the program
number in brackets, i.e. [01] for program 1. If any changes are made in
the program, an exclamation point “!” will appear to the left of the
name. This indicates the program has been modified but not yet saved
to disk or Rom. Saving the program will clear this exclamation point.
The current program status area is also an active region of the screen that
you may double-click with the mouse. The result of a double-click is to
pop up a list of current programs loaded in the Remote Control. The
current program in this list will have a check mark to the left of its
name. You may select another program from this list if desired. A
sample list is pictured below:
Fig. 6 goes here
Program List from Double-Clicking Current Program Status Area
The Lock Button
The Lock button enables/disables channel “ganging” of the faders. The
button will display “Locked” when the left and right channels are
ganged, and will display “Lock” when they are not ganged. Ganging
allows you to control both the left and right channels at the same time
by dragging the fader or slider of one channel. Typically, it’s useful to
gang the faders when working with audio that is well-balanced (tone as
well as volume) between the left and right channels. On the other hand,
one channel may contain totally different material or require tweaking --
use the faders in an unganged fashion to set the left and right channel
parameters to their own unique settings.
The Flat Button