HONDA 2013 Civic Hybrid - Manual (Page 277)

276
uu Replacing Light Bulbs u Rear License Plate Light Bulbs
Main
tenan
ce
Rear License Plate Light Bulbs
When replacing, use the following bulbs.
1. Remove the screw from the center of the
fastener using a Phillips-head screwdriver.
2. Remove the holding clips using a flat-tip
screwdriver, then pull the lining back.
2 Rear Turn Signal Light Bulbs P. 274
3. Remove the license plate light assembly by
squeezing the tabs on both sides of the
socket.
4. Remove the old bulb and insert a new bulb.
High-Mount Brake Light Bulbs
High-mount brake light bulbs are LED type. Have an authorized Honda dealer
inspect and replace the light assembly.
Rear License Plate Light: 5 W
Lining
Fastener
Clip
Bulb
Socket
13 CIVIC HYBRID-31TR26100.book 276 ページ ２０１２年１２月１８日 火曜日 午後２時５９分
Home
QRG
Index
TOC