HONDA 2013 Civic Hybrid - Manual (Page 270)

269
uu Maintenance Under the Hood u Brake Fluid
Main
tenan
ce
Brake Fluid
Check the fluid level several seconds after you
turn the ignition switch to ON
( w .
The fluid level should be between the MIN
and MAX marks on the side of the reservoir.
Specified fluid: Honda Heavy Duty Brake Fluid DOT 3
■
Checking the Brake Fluid
1 Brake Fluid
NOTICE
Brake fluid marked DOT 5 is not compatible with your
vehicle’s braking system and can cause extensive
damage.
If the specified brake fluid is not available, you should
use only DOT 3 or DOT 4 fluid from a sealed
container as a temporary replacement.
Using any non-Honda brake fluid can cause corrosion
and decrease the longevity of the system. Have the
brake system flushed and refilled with Honda Heavy
Duty Brake Fluid DOT 3 as soon as possible.
If the brake fluid level is at or below the MIN mark,
have a dealer inspect for leaks or worn brake pads as
soon as possible.
Brake Reservoir
MAX
MIN
13 CIVIC HYBRID-31TR26100.book 269 ページ ２０１２年１２月１８日 火曜日 午後２時５９分
Home
QRG
Index
TOC