Vsa® on and off, P 236), Off button – HONDA 2013 Civic Hybrid User Manual
Page 237: P236)

uu
When Driving
u
Vehicle Stability Assist (VSA®), aka Electronic Stability Control (ESC), System
236
Driving
This button is on the driver side control panel.
To turn the VSA® system on and off, press and
hold it until you hear a beep.
VSA® will stop and the indicator will come on.
To turn it on again, press the
(VSA® OFF)
button until you hear a beep.
VSA® is turned on every time you start the
engine, even if you turned it off the last time
you drove the vehicle.
■
VSA® On and Off
1
Vehicle Stability Assist (VSA®), aka Electronic Stability Control
(ESC), System
Without VSA®, your vehicle will have normal braking
and cornering ability, but it will not have VSA®
traction and stability enhancement.
In certain unusual conditions when your vehicle gets
stuck in shallow mud or fresh snow, it may be easier
to free it with the VSA® temporarily switched off.
When the VSA® system is off, the traction control
system is also off. You should only attempt to free
your vehicle with the VSA® off if you are not able to
free it when the VSA® is on.
Immediately after freeing your vehicle, be sure to
switch VSA® on again. We do not recommend driving
your vehicle with the VSA® and traction control
systems switched off.
If the low tire pressure/TPMS indicator
*
, comes on or
blinks, the VSA® system comes on automatically. In
this case, you cannot turn the system off by pressing
the
button.
You may hear a motor sound coming from the
engine compartment while system checks are being
performed immediately after starting the engine or
while driving. This is normal.
Models without LDW
VSA® OFF
Indicator
Models with LDW
VSA® OFF
Indicator
*
Not available on all models
13 CIVIC HYBRID-31TR26100.book 236 ページ 2012年12月18日 火曜日 午後2時59分
Home
QRG
Index
TOC