HONDA 2012 Fit - Manual (Page 77)

76
Co
ntrols
Setting the Clock
Clock
You can adjust the time in the clock display, using the CLOCK button with the
ignition switch in ACCESSORY
( q or ON ( w .
1. Press and hold the CLOCK button until the clock display begins to blink.
2. Press the ( 1 (Hour) button to change the hours.
3. Press the ( 2 (Minute) button to change the minutes.
4. Press the CLOCK button to go back to the normal display.
■
Adjusting the Time
1 Clock
Press and hold the CLOCK button until the clock
display begins to blink, then press the
( 3 (Reset)
button.
Depending on the displayed time, the clock sets
forward or backward.
Example:
1:06 will reset to 1:00
1:53 will reset to 2:00
The clock is automatically updated through the
navigation system, so the time does not need to be
adjusted.
Models without navigation system
Models with navigation system
Models without navigation system
( 1 Button
( 3 Button
Clock Display
CLOCK Button
( 2 Button
US FIT-31TK6630.book 76 ページ ２０１１年６月１５日 水曜日 午後４時２３分
2012 Fit
Home
QRG
Index
TOC