HONDA 2012 Fit - Manual (Page 182)

181 Continued
Driving
Braking
Brake System
Use the parking brake to keep the vehicle stationary when parking.
To apply:
Pull the lever fully up without pressing the
release button.
To release:
1. Pull the lever slightly, and press and hold
the release button.
2. Lower the lever down all the way, then
release the button.
■ Parking Brake 1 Parking Brake
NOTICE
Release the parking brake fully before driving. The
rear brakes and axle can be damaged if you drive
with the parking brake applied.
If you start driving without fully releasing the parking
brake, a buzzer sounds as a warning.
Always apply the parking brake when parking.
To prevent the parking brake from freezing when the
outside temperature is extremely cold, do not apply
it, but do the following:
Put the shift lever in ( P, then use a block or other
wheel chock to stop the wheels from turning.
Put the shift lever in ( R or ( 1, then use a block or
other wheel chock to stop the wheels from turning.
Automatic transmission models
Manual transmission models
a
b
US FIT-31TK6630.book 181 ページ ２０１１年６月１５日 水曜日 午後４時２３分
2012 Fit
Home
QRG
Index
TOC