HONDA 2012 Fit User Manual
Page 163
uu
When Driving
u
Starting the Engine
162
Driving
3. Turn the ignition switch to START
(
e
without depressing the accelerator pedal.
1. Keeping your right foot on the brake pedal, release the parking brake. Check that
the brake system indicator has gone off.
2. Put the shift lever in
(
D
. Select
(
R
when reversing.
3. Gradually release the brake pedal and gently depress the accelerator pedal to pull
away.
1
Starting the Engine
Do not hold the key in START
(
e for more than 15
seconds.
•
If the engine does not start right away, wait for at
least 10 seconds before trying again.
•
If the engine starts, but then immediately stops,
wait at least 10 seconds before repeating step 3
while gently depressing the accelerator pedal.
Release the accelerator pedal once the engine
starts.
The immobilizer system protects your vehicle from
theft. If an improperly coded key (or other device) is
used, the engine’s fuel system is disabled.
■
Starting to Drive
Automatic transmission models
US FIT-31TK6630.book 162 ページ ２０１１年６月１５日 水曜日 午後４時２３分
2012 Fit
Home
QRG
Index
TOC