HONDA 2012 Fit - Manual (Page 121)

uu Heating and Cooling * u Using Vents, Heating and A/C *
120
Co
ntrols
1. Adjust the fan speed using the fan control
dial.
2. Select and .
3. Adjust the temperature using the
temperature control dial.
4. Press the A/C button (the indicator on).
■ To rapidly cool down the interior
1. Set the fan to the maximum speed.
2. Set the temperature to maximum cool.
3. Select .
1. Select turns the air conditioning system
on.
2. Select .
■ To rapidly defrost the windows
1. Set the fan to the maximum speed.
2. Select .
3. Select .
4. Set the temperature to maximum heat.
■ Cooling * 1 To rapidly cool down the interior
If the interior is very warm, you can cool it down
more rapidly by partially opening the windows.
■ Defrosting the Windshield and Windows *
1 Defrosting the Windshield and Windows *
For your safety, make sure you have a clear view
through all the windows before driving.
Do not set the temperature near the upper or lower
limit.
When cold air hits the windshield, the outside of the
windshield may fog up.
If the side windows fog up, adjust the vents so that
the air hits the side windows.
1 To rapidly defrost the windows
After defrosting the windows, switch over to fresh air
mode.
If you keep the system in recirculation mode, the
windows may fog up from humidity. This impedes
visibility.
* Not available on all models
US FIT-31TK6630.book 120 ページ ２０１１年６月１５日 水曜日 午後４時２３分
2012 Fit
Home
QRG
TOC
Home
QRG
Index