HONDA 2012 Fit - Manual (Page 266)

Continued 265
uu Emergency Towing u
Han
d
lin
g the U
n
expected
For very short distances, such as freeing the vehicle, you can use the detachable
towing hook that mounts on the anchors in the front and rear bumpers.
1. Put cloth on the edge of the cover.
Carefully pry with a small flat-tip
screwdriver or a metal fingernail file to
remove the cover.
2. Take the towing hook and the wheel nut
wrench out of the tool bag in the cargo
area.
3. Screw the towing hook into the hole, and
tighten it with the wheel nut wrench.
■ Towing Hook 1 Towing Hook
NOTICE
To avoid damage to your vehicle, use the towing
hook for straight, flat ground towing only. Do not
tow at an angle. This hook should not be used to tow
the vehicle onto a flat bed. Do not use it as a tie
down.
Make sure to use the properly-designed and attached
towing equipment.
NOTICE
Do not slip the clutch for a long time to get unstuck.
This may overheat and damage the transmission.
Cover
Towing Hook
Wheel Nut Wrench
US FIT-31TK6630.book 265 ページ ２０１１年６月１５日 水曜日 午後４時２３分
2012 Fit
Home
QRG
Index
TOC