FIAT Grande Punto Actual User Manual

Page 38

SAFETY DEVICES

CORRECT USE OF THE CAR

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

Average consumption

This value shows the average consump-
tion from the start of the new mission.

Instant consumption

This value shows instant fuel consumption
(this value is updated second by second).
If parking the car with engine on,
the display will show “----”.

Average speed

This value shows the car average speed as
a function of the overall time elapsed since
the start of the new mission.

Travel time

This value shows the time elapsed since
the start of the new mission.

IMPORTANT Lacking information, Trip
computer values are displayed with “----”.
When normal operating condition is re-
set, calculation of different units will
restart regularly. Values displayed before
the failure will not be reset.

fig. 26

F0M0124m

TRIP button fig. 26
Button TRIP, set on the top of the right
steering column stalk, shall be used (with
ignition key at MAR) to display and to re-
set the previously described values to start
a new mission:
– short push to display the different val-
ues
– long push to reset and then start a new
mission.

New mission
Reset can be:
– “manual” resetting by the user, by press-
ing the relevant button;
– “automatic” resetting, when the “Trip dis-
tance” reaches 3999.9 km or 9999.9 km
(according to the type of display) or when
the “Travel time” reaches 99.59 (99 hours
and 59 minutes);
– after disconnecting/reconnecting the
battery.

IMPORTANT The reset operation in the
presence of the screens concerning the
“Trip A” makes it possible to reset only
the information associated with this func-
tion.

IMPORTANT The reset operation in the
presence of the screens concerning the
“Trip B” makes it possible to reset only
the information associated with this func-
tion.

Start of journey procedure

With ignition key at MAR, press and keep
button TRIP pressed for over 2 seconds
to reset.

Exit Trip

To quit the Trip function: keep button
MENU ESC pressed for over 2 seconds.